How to Choose the Right Biological Water Filtration System

October 24, 2017

How to Choose the Right Biological Water Filtration System

There are many different biological treatments of water available. They’re all similar in a number of ways, but share key differences in the specific ways the water is filtered. This article is an informative breakdown of all the different biological water treatment systemsthat are available and how they work.

Slow Sand Filtration

This system supports the growth and maintenance of microorganisms that eventually become its primary filtering mechanism. Its layers work to get rid of any potential contaminants that are within the water. Slow sand filtration has been among the most effective filtration systems for preventing the spread of diseases for the last century now. It has been very common in western Europe and the United Kingdom until recently, due to rising labor costs which that made the system too expensive. Despite that, it continues to be a very sustainable method of water filtration.

Rapid Sand Filtration

Rapid sand filtration is a similar biological water filtration system. The main difference with this method is that it uses a much larger surface loading rate. This means that microorganisms can reach deeper in the filter media in comparison to the slow sand filtration system. For this system, it’s highly recommended to add disinfectants downstream of the filter media in order to maintain biology activity.

Biological Activated Carbon Filtration  

This method of water filtration is mainly used for the removal of specific organic contaminants as well as natural organic matter. It’s based upon the absorption and assimilation of containment. Relying on this method can allow for higher microbial concentrations compared to other systems.

Ozone-Enhanced Biological Filtration

This biological filtration system is used specifically to treat drinking water. It aims to remove several possible contaminants while also improving the appearance of the water itself. Ozone-enhanced treatment is widely used in many drinking water production facilities. One thing to note about this system is that it can cause a noticeable increase in BDOC/AOC levels which means a biofiltration (Sand/GAC) step must be added.

Operational and Design Considerations

Clear glass of water

Biological water filtration systems are all based on the same objective which is the maintenance of microorganisms and assurance of biological quality being held to the standard required. This is done through the removal of inorganic and organic matter. There are many factors which contribute to the overall biofilter performance. These are maturation time, temperature, oxygen levels, redox control, contact time, and adequate backwash conditions.

The time it takes the biofilter to reach an adequate level of biological activity is a very important design consideration. In sand-based filters, this time can be around two months. There are still looming questions over the safety of engineered biofiltration when it is used for drinking water production. Studies have often fail to look at every characteristic of the water in-depth, preferring to only cover the removal of organic matter. There’s a risk of absorbed contaminants from the treatment process ending up in the water as well, but more research is required to fully understand this.

You should now have a much clearer idea of how exactly biological filtration systems work and, more particularly, how each separate system works. With this knowledge, you can make a much more informed decision as to what the right biological filter is for you.