Quilicura Municipality, Chile - Arsenic Removal

March 28, 2017
AdEdge Quilicura, Chile
1,600 gpm

Quilicura is a municipality located in the Santiago Metropolitan Region in Chile. Well #3 has a flow of 1,600 gallons per minute (100 liters per second). The well has a high concentration of arsenic that fluctuates between 0.040 mg/L and 0.060 mg/L, well above the World Health Organization’s standard of 0.010 mg/L. In addition to the high arsenic concentration, the site has challenges with pH that ranges from 7.0 to 9.5. AdEdge was contacted by EcoRiles in 2013 to design, manufacture, and commission an arsenic removal solution for the Quilicura municipality.

The AdEdge arsenic treatment solution consists of four WaterPOD containerized systems rated for a combined total of 1,600 gpm (100 lps). Each WaterPOD contains six 48-inch carbon steel vessels in a parallel configuration. The vessels are loaded with AdEdge Bayoxide E33 granular ferric oxide media. The E33 binds the arsenic to the media structure and does not lose that bond during backwash. The system has an ADIN chemical feed dosing system that is mounted outside the WaterPODs.

The chemical feed dosing system consists of a sodium hypochlorite module that oxidizes the arsenic from trivalent to pentavalent. A second chemical feed module uses hydrochloric acid to lower the pH and improve media life.

Backwashing of the treatment vessels occurs every 45 to 60 days to prevent hydraulic channeling and to remove any suspended solids that may have accumulated in the bed. Backwash operations are automatically controlled by an AdEdge InGenius control panel that includes a PLC and a HMI.

The WaterPOD treatment units were shipped in 2013 to Chile and began operation in November 2013. The treatment units have consistently lowered the arsenic concentration to non-detectable levels since they started up.

Case Study Fast Facts

Located: Quilicura, Chile
Date: November 2013
Contaminant treated: Arsenic
Flow rate: 1,600 gpm

Read More

Bakersfield Well #26 in California was experiencing high arsenic levels in multiple groundw
In 2013, AdEdge Water Technologies was contacted by Valentine Engineering to participate in a design
In late 2009, Water Works Engineers contacted AdEdge to design and implement an


Keep up-to-date with our latest news, developments in the water treatment industry, and some general fun.